Instruction Manual

FLI Charge Instruction Manual

Congratulations on your FLI Charge purchase!

Now you can charge your electronic devices quickly and conveniently using your FLI Charge charging pads, smartphone cases and universal adaptors.  All of the products in the FLI Charge ecosystem have been designed with ease of use in mind.  FLI Charge transforms the way you power your life – allowing you to keep all of your mobile devices fully charged while reducing the hassle of power cords and cables.

Please review the applicable operating instructions in this manual prior to first use.

FLI CHARGE PRODUCTS

FLIway 40 

The FLIway 40 charging pad can charge and power multiple devices at the same time up to a total of 40 watts.  Conveniently charge phones, tablets, smart watches and other mobile devices regardless of their orientation on the surface of the FLI Charge charging pad.  

  1. Set Up
  • Place the FLIway 40 charging pad on a flat service
  • Plug the AC adaptor into a wall outlet
  • Insert the DC power plug firmly into pad connector
  1. Operation - Charging your FLI Charge-enabled devices:
  • Once the FLIway 40 charging pad is plugged in, the indicator light will turn on while the system status is checked. If the system is functioning properly and there are no faults detected (i.e. keys, liquid, metal objects or a finger on the surface of the FLIway 40 charging pad), the indicator light will turn off in 3-5 seconds. You are now ready to charge your FLI Charge-enabled devices.
  • Simply place your FLIcase smartphone case, FLIcube module or FLIcoin module anywhere on the FLIway 40 charging pad with the constellation facing down. Please ensure that the FLIcase smartphone case, FLIcube module or FLIcoin module make firm contact with and lay flat on the FLIway 40 charging pad. Charging will not occur if proper contact is not made between the constellation and the FLIway 40 charging pad.
  • The blue indicator light will light up to show you that your device is receiving power. If a fault is detected, the FLIway 40 charging pad will shut off and the indicator light will blink red and then stop illuminating. Once the fault is removed, the FLIway 40 charging pad will turn back on.
  • When not in use, the FLIway 40 charging pad will be in Sleep Mode. In this mode, the FLIway 40 charging pad and the indicator light turn off.
  • You may simultaneously power and charge several FLI Charge-enabled devices on the FLIway 40 charging pad.
  • Make sure to place only FLI Charge-enabled devices on the FLIway 40 charging pad.
  • Devices that are not FLI Charge-enabled devices may not receive power.
  1. Maintenance and Usage
  • The FLIway 40 charging pad can charge several devices (smartphones, tablets, smart watches, portable speakers, etc.) at the same time including up to 8 smartphones. However, certain devices or combination of devices may require more power than is available. When this happens, the indicator light will blink red 3 times. Remove the devices, one at a time, until the blinking stops.
  • If the indicator light blinks red 1 time, this means that a fault is detected. Remove any foreign object or device to remedy the problem.
  • Please ensure that dirt or other contaminants are not on the FLIway 40 charging pad.
  • Charging will not occur if proper contact between the FLI Charge-enabled device and the FLIway 40 charging pad is not made. 


FLIcases

The FLIcase smartphone cases are designed to fit various models of smartphones. 

  1. Installation
  • Separate the two pieces of the FLIcase smartphone case.
  • Carefully insert your smartphone into the FLIcase smartphone case, making sure that the connector fits firmly into place. 

  • Press firmly on each corner of the FLIcase to ensure proper fit. The two pieces will lock together when properly installed.
  1. Operation
  • Simply place your FLIcase smartphone case anywhere on the surface of the FLIway 40 charging pad with the constellation facing down. Please ensure that the FLIcase smartphone case makes firm contact with and lays flat on the surface of the FLIway 40 charging pad. Charging will not occur if proper contact is not made between the constellation and the FLIway 40 charging pad.
  • To verify charging, the indicator light on the FLIway 40 charging pad will turn on and the display on your smartphone will show that the phone’s battery is charging.
  • In the event that you are without the FLIway 40 charging pad, you can charge your smartphone via the microUSB connector on the bottom of the FLIcase smartphone case. 

FLIcube

The FLIcube module provides a convenient charging option for your devices including smartphones, tablets, smart watches, fitness trackers, gaming controllers, portable speakers, and e-readers. The FLIcube module is embedded with a constellation to send power to your device via a USB power cord.

  1. Installation
  • Plug a USB power cord into the USB port on the side of the FLIcube module.
  1. Operation 
  • Simply place your FLIcube module anywhere on the surface of the FLIway 40 charging pad with the constellation facing down. Please ensure that the FLIcube module makes firm contact with and lays flat on the surface of the FLIway 40 charging pad. Charging will not occur if proper contact is not made between the constellation and the FLIway 40 charging pad.
  • To verify charging, the indicator light on the FLIway 40 charging pad will turn on, and the display or battery indicator on your mobile device will show that its battery is charging.

FLIcoin

The FLIcoin is a small, versatile universal adapter that turns normal microUSB and Apple Lighting products into hassle free, wireless mobile devices. Simply adhere and connect the FLIcoin to a mobile device and place it on a FLIway 40 charging pad to begin powering the device.

The FLIcoin is ideal for multiple mobile devices, including smartphones, tablets, smart watches, fitness trackers, ear-buds, headphones, portable speakers, mobile cameras, portable backup batteries and many other electronic devices.

  1. Installation
  • Unwind the cord from the FLIcoin and insert into the microUSB or Lighting connector port in your device.
  • Remove the adhesive strip from the metallic disc and place it firmly on your device and place the FLIcoin on top of the metallic disc where it will magnetically locate and stay in place.
  1. Operation
  • Simply place your FLIcoin module anywhere on the surface of the FLIway 40 charging pad with the constellation facing down. Please ensure that the FLIcoin module makes firm contact with and lays flat on the surface of the FLIway 40 charging pad. Charging will not occur if proper contact is not made between the constellation and the FLIway 40 charging pad.
  • To verify charging, the indicator light on the FLIway 40 charging pad will turn on and the display or battery indicator on the mobile device will show that its battery is charging. 

PRODUCT CLEANING

  • Disconnect power from the FLIway 40 charging pad.
  • Wipe surfaces with a clean damp cloth.
  • Remove any excess moisture with a clean dry cloth.
  • Reconnect power to the FLIway 40 charging pad. 


TROUBLESHOOTING 

Potential issues and suggested solutions:

Issue:

  • Indicator light does not illuminate or blinks red and turns off when a mobile device is placed on the FLIway 40 charging pad.

Causes & Solutions:

  • The mobile device is not FLI Charge-enabled. The FLIway 40 pad will only power mobile devices that are FLI Charge-compatible. Place only FLI Charge-enabled mobile devices on the charging pad.
  • The mobile device is not positioned properly on the FLIway 40 charging pad surface. Ensure that the mobile device is resting flatly on and is making good contact with the FLIway 40 charging pad surface. Also, clean the FLIway 40 charging pad surface if needed.
  • The DC power plug is not firmly plugged into charging pad, or the AC adapter is not plugged into wall socket. Ensure that the AC adapter is plugged into a working outlet and that the DC power plug is firmly inserted into the FLIway 40 charging pad.
  • Metallic objects may be on the FLIway 40 charging pad. Remove metal objects from the FLIway 40 charging pad and charging will resume normally.

Issue:

  • The mobile device does not indicate (via the smartphone display or mobile device battery indicator) that the mobile device is charging when the mobile device is placed on the FLIway 40 charging pad.

Causes & Solutions:

  • The mobile device is not resting properly on the FLI Charge 40 charging pad surface. Ensure that the mobile device is resting flatly on (constellation down), and is making good contact with the surface of the FLIway 40 charging pad. Also, clean the FLIway 40 charging pad surface if needed.

Issue:

  • The indicator light on the FLIway 40 charging pad continuously blinks on and off (mobile devices do not charge).

Cause & Solution:

  • Overload condition; too many devices are resting on the FLIway 40 charging pad at one time. Remove mobile devices, one at a time, until the blinking stops.

 

FLI CHARGE PRODUCT TECHNICAL SPECIFICATIONS

 

 

 

Output Voltage

(Volts)

Output Current

(Amps)

Power Consumption

(Watts)

FLIway 40

20V

2A

40W

FLIcase

Apple iPhone 6/6s

5V

1A

5W

Apple iPhone 6/6s Plus

5V

1A

5W

Apple iPhone 7

5V

1A

5W

Apple iPhone 7 Plus

5V

1A

5W

Samsung Galaxy S6

5V

1A

5W

Samsung Galaxy S6 edge

5V

1A

5W

Samsung Galaxy S7

5V/9V

2A/1.67A

10W/15W

Samsung Galaxy S7 edge

5V/9V

2A/1.67A

10W/15W

FLIcube

5.2V

2.4A

12W

FLIcoin

Apple Lightning

5V

1A

5W

microUSB

5V

1A

5W

 

 

 

FLI CHARGE LIMITED WARRANTY

What the Warranty covers

Pursuant to this limited warranty (the “Warranty”), FLI Charge, Inc. (“FLI Charge”) warrants to the original purchaser of a FLI Charge product that such product shall be free of defects in design, assembly, material, or workmanship.

What the period of coverage is

FLI Charge warrants each of its products for one (1) year from the original date of purchase.

What the Warranty does not cover

This Warranty does not cover damage caused by misuse or abuse, accident, the attachment of any unauthorized accessory, alteration to the product, improper installation, unauthorized repairs or modifications, improper use of electrical/power supply, loss of power, dropped product, malfunction or damage of an operating part from failure to provide manufacturer’s recommended maintenance, transportation damage, theft, neglect, vandalism, environmental condition, loss of use during the period that the product is at a repair facility or otherwise awaiting parts or repair, or any other conditions whatsoever that are beyond the control of FLI Charge.

This Warranty is effective only if the product is purchased and operated in the country in which the product is purchased. A product that requires modifications or adoption to enable it to operate in any other country than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications is not covered under this Warranty.

FLI Charge reserves the right to discontinue any of its products without notice, and disclaims any limited warranty to repair or replace any such discontinued products. In the event that FLI Charge is unable to replace the product (for example, because such product has been discontinued), FLI Charge will offer a similar replacement product if possible.

This Warranty does not apply to products purchased from a source other than FLI Charge or a FLI Charge Authorized Reseller.

How to Replace Defective Products

If found to be defective, in FLI Charge’s sole discretion, FLI Charge devices will be replaced without charge when returned to FLI Charge.  Please send FLI Charge devices to:  FLI Charge: 5590 W Chandler Blvd #3, Chandler, AZ 85226, United States. You can contact customer support by calling 212-309-7549 or e-mailing support@flicharge.com.

FLI Charge reserves the right to review the damaged FLI Charge product. All costs of shipping the FLI Charge product to FLI Charge for inspection shall be borne solely by the purchaser. If FLI Charge determines, in its sole discretion, that it is impractical to ship the damaged equipment to FLI Charge, FLI Charge may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment. The cost, if any, of shipping the equipment to and from such repair facility and of such estimate shall be borne solely by the purchaser. Damaged products must remain available for inspection until the claim is finalized. Whenever claims are settled, FLI Charge reserves the right to be subrogated under any insurance policies the purchaser may have.

Disclaimer

IN THOSE JURISDICTIONS WHERE IT CAN LAWFULLY DO SO, AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE WARRANTY PROVIDED HEREIN SHALL BE THE SOLE AND EXCLUSIVE WARRANTY. FLI CHARGE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS, STATUTORY, OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY, ACCEPTABILITY, SATISFACTORY QUALITY, NON-INFRINGEMENT, TITLE, FITNESS FOR A PARTICULAR PURPOSE, LOSS OF OR DAMAGE TO DATA, LACK OF VIRUSES OR FREE FROM VIRUS OR MALWARE ATTACK, SECURITY, PERFORMANCE, LACK OF NEGLIGENCE, WORKMANLIKE EFFORT, QUIET ENJOYMENT, THAT THE FUNCTIONS CONTAINED IN THE PRODUCT WILL MEET YOUR REQUIREMENTS, OR THAT DEFECTS IN THE PRODUCT WILL BE CORRECTED, OR THAT YOUR USE OF THE PRODUCT WILL GENERATE ACCURATE, RELIABLE, TIMELY RESULTS , INFORMATION, OR DATA. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY FLI CHARGE, A DEALER, AGENT, OR AFFILIATE SHALL CREATE A WARRANTY. TO THE EXTENT WARRANTIES CANNOT BE DISCLAIMED OR EXCLUDED, THEY ARE LIMITED TO THE DURATION OF THE RELEVANT EXPRESS WARRANTY PERIOD.

IN NO EVENT SHALL THIS WARRANTY REQUIRE MORE THAN THE REPLACEMENT OF ANY PRODUCT WHICH IS FOUND TO BE DEFECTIVE WITHIN THE EFFECTIVE PERIOD OF THE WARRANTY. NO REFUNDS WILL BE GIVEN. FLI CHARGE RESERVES THE RIGHT TO MAKE PRODUCT SUBSTITUTIONS IN LIEU OF REPLACEMENT.

EXCEPT AS PROVIDED IN THIS WARRANTY AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL FLI CHARGE, ITS AFFILIATES, DEALERS, AGENTS OR SUPPLIERS OR THEIR RESPECTIVE OFFICERS, DIRECTORS, EMPLOYEES, LICENSORS AND ASSIGNS BE LIABLE FOR ANY DIRECT, INDIRECT, EXEMPLARY, PUNITIVE, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING BUT NOT LIMITED TO DAMAGES FOR LOSS OF PROFITS OR REVENUE, FOR BUSINESS INTERRUPTION, FOR PERSONAL INJURY, FOR LOSS OF PRIVACY, FOR LOSS OF ABILITY TO USE ANY THIRD PARTY PRODUCTS OR SERVICES, FOR FAILURE TO MEET ANY DUTY INCLUDING OF GOOD FAITH OR OF REASONABLE CARE, FOR NEGLIGENCE, AND FOR ANY OTHER PECUNIARY OR OTHER LOSS WHATSOEVER), REGARDLESS OF THE THEORY OF LIABILITY (CONTRACT, TORT OR OTHERWISE) ARISING OUT OF OR IN ANY WAY RELATED TO THE USE OF OR INABILITY TO USE THE PRODUCT, EVEN IF FLI CHARGE OR SUCH OTHER ENTITIES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT SHALL THE TOTAL AGGREGATE LIABILITY OF FLI CHARGE, ITS AFFILIATES, ASSOCIATES, DEALERS, AGENTS OR SUPPLIERS TO YOU FOR ALL DAMAGES EXCEED THE PRICE YOU PAID FOR THE PRODUCT. THIS LIMITATION IS CUMULATIVE AND WILL NOT BE INCREASED BY THE EXISTENCE OF MORE THAN ONE INCIDENT OR CLAIM. THE FOREGOING LIMITATIONS WILL APPLY EVEN IF ANY WARRANTY OR REMEDY PROVIDED FAILS OF ITS ESSENTIAL PURPOSE.

THE WARRANTIES AND REMEDIES SET OUT HEREIN ARE EXCLUSIVE, AND, TO THE EXTENT PERMITTED BY LAW, IN LIEU OF ALL OTHERS ORAL OR WRITTEN, EXPRESS OR IMPLIED. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF IMPLIED WARRANTIES OR OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE FOREGOING LIMITATIONS MAY NOT APPLY TO YOU.

IF ANY TERM IS HELD TO BE ILLEGAL OR UNENFORCEABLE, THE LEGALITY OR ENFORCEABILITY OF THE REMAINING TERMS SHALL NOT BE AFFECTED OR IMPAIRED.

How state law relates to the Warranty

Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which may vary from state to state. Some states do not allow the exclusion or limitation of incidental, consequential, or other damages, so the above limitations may not apply to you.

WARNING & SAFETY INFORMATION

WARNING: Failure to follow these safety instructions could result in fire, electric shock, or other injury or damage.

When using electrical devices certain precautions should be followed, including:

Reduce the risk of electric shock:

  • Unplug the device from the electrical outlet prior to cleaning.
  • Do not reach for an appliance that has fallen into water. Unplug it immediately.
  • Do not place or store appliance where it can fall or be pulled into water.
  • Do not place in or drop into water or other liquid.

To reduce the risk of burns, fire, electric shock or injury:

  • Do not use with extension cord.
  • Close supervision is necessary when FLI Charge products are used by or near children or disabled persons.
  • Use FLI Charge products only for their intended use as described in this manual.
  • Do not use with accessories of devices not having the FLI Charge logo.
  • Never operate FLI Charge products if they have damaged cords, plugs, cables or housing.
  • If FLI Charge products are not working properly, have been dropped or damaged, return it to FLI Charge for examination and repair.
  • Keep FLI Charge product cords away from heated surfaces.
    Do not operate FLI Charge products where aerosol (spray) products are being used or where oxygen is being administered.
  • FLI Charge products are designed for indoor use only. Do not use outdoors.
    Only set on dry surfaces. Do not place on surface wet from water or cleaning solvents.

All servicing of this product must be performed by only authorized FLI Charge Service Personnel.

FCC/INDUSTRY CANADA COMPLIANCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

CE DECLARATION OF CONFORMITY

Hereby, FLI Charge declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC. A copy of the Declaration of Conformity can be found at on FLI Charge’s website, at www.flicharge.com.

For more information on FLI Charge please visit www.flicharge.com.

Welcome to Life on the FLI!

© 2016 FLI Charge, Inc.  All rights reserved.  FLI Charge, FLIcase, FLIway 40, FLIcube and FLIcoin are trademarks of FLI Charge, Inc.  All other trademarks, product names, company names, logos, service marks, and/or trade dress mentioned, displayed, cited, or otherwise indicated herein are the property of their respective owners, and the use or misuse of such trademarks, product names, company names, logos, service marks, and/or trade dress except as permitted herein is expressly prohibited.